Docker image size optimization for your Node.js app in 3 easy-to-use steps

Introduction

Docker is a software platform designed to make it easier to create, deploy, and run applications by using containers and is one of the most required and great technologies in the world of modern development. So, we run almost all of our projects through it. Our business task was to run as many Docker containers as possible on an embedded device (Raspberry Pi), the problem is that usually, standard Docker images have a really big size ~600 MB and the average size of our Node Docker images were reaching over than 700 MB. Therefore, today, I would like to share our experience with you on how to optimize Node.js Docker images and go through all the steps from the starting point of our optimization to the point where we are now.

Steps to Node.js Docker image optimization we will go through:

• Step 1: Simple image size optimization
• Step 2: Get rid of unnecessary dependencies
• Step 3: Compile your app to a single bundle using NCC

By the way, if you need help in implementing your project on the JS Node, not only in optimizing images, you can always contact us.

Image size optimization step by step

The first thing that comes on mind when we do not think about optimization is using a standard image. So let’s find out how to reduce the Docker image size in Node.js.

Here is an example of Dockerfile that we were using:

FROM node:10
WORKDIR /app
COPY . .
RUN npm install
CMD ["npm", "run", "start"]

Build via this Dockerfile looks acceptable, but there is much work to do:

1. Do not specify FROM node or FROM node: as your base image.Full Node.js image adds a significant number of tools, like:– source controls software, such as git and others
   – runtime libraries and build tools
   – libraries and API setsThat’s why full Node.js image usually starts from 600 MB. At the time of writing the post, the official full Node Docker image size is 900 MB and 899 MB for node:10
2. Node modules that we do not need (We will talk about this in further steps).

From here we have ~100 MB of Node modules and 600 MB of the only base image.
The total size of our images was ~700 MB.
Yes, we had a Layered Node.js image, but 600 MB was still unacceptable for us.

Step 1: Simple image size optimization

Take an initial smaller Node image. It is easy to find on dockerhub, and there are few small sized images.

• alpine – That’s what I strongly recommend.
• slim

Alpine is the best choice for a base image – it is the smallest one (only 70 MB). We tried it, but it did not work for us because of the processor architecture on the target platform. Our armv7 and alpine are not supported for this one. So we decided to use Docker slim (~100 MB), but we still keep in mind that we can build a new image on the base of alpine Linux for armv7.

After this step, our Dockerfile looked like:

FROM node:10-slim
WORKDIR /app
COPY . .
RUN npm install 
CMD ["npm", "run", "start"]

So the difference now is 100 MB of the base image and ~100 MB of node_modules for each image

Alexey Krol

Chief Business Development Officer

Consulted 30+ IoT startups to speed up time to market.

Get a Consultation

Step 2: Get rid of unnecessary dependencies

Install only production dependencies

FROM node:10-slim
WORKDIR /app
COPY . .
RUN npm install --production
CMD ["npm", "run", "start"]

After this small improvement, our delta for node_modules was ~60 MB

Node.js Process Managers

Process Manager is a tool, which provides an ability to control IOT application lifecycle and monitor the running services to maintain your project operability. Here is the list of most popular ones:

• PM2
• Supervisor
• Forever

When we do not use Docker, we use PM2 to run our app in production. The great thing for Docker is that you don’t need process manager inside the container. You can use the Docker restart policy instead:

docker run --restart on-failure <your image>

Also, Docker provides

--restart always/no/unless-stopped

What did we get from it? By the way, find out about Nodejs configuration management

– Before getting rid of pm2:

• containers RAM usage ~80 MB
• delta only for node_modules 60 MB

– After:

• containers RAM usage ~50 MB
• delta for node_modules ~20 MB

So the Dockerfile is:

FROM node:10-slim
WORKDIR /app
COPY . .
RUN npm install --production
CMD ["node", “app.js”]

Read Also: IoT wearable technologies

Step 3: Compile your app to a single bundle using NCC

NCC is a simple CLI for compiling Node.js app into a single file, together with all its dependencies. Moreover, it is easy to use:

npm i -g @zeit/ncc
mkdir dist
ncc build app.js -o dist

The last command will build your app and store it in dist/index.js file. By the way, we have best practices for building CLI and publishing it to NPM. In this article we wrote about it in more detail.

Combining Docker and NCC

Now, let’s get back to Docker.

Every time you do RUN, COPY, ADD in your Dockerfile Docker will create a new layer, directly increase the size of the build and cache it so if you do:

FROM node:10-slim
WORKDIR /app
COPY . .
RUN npm install --production
RUN npm install -g @zeit/ncc
RUN ncc build app.js -o dist
RUN rm -rf node_modules
CMD ["node", "dist/index.js"]

Your image size still will be like with node_modules and Docker will cache all the layers, so if you build another image via this Dockerfile, it will use files and node_modules form the old one.

To prevent caching use:

docker build -t myimage . --no-cache

To prevent size increasing, we have 3 options:

1. Build locally and copy.

ncc build app.js -o dist rm -rf node_modules

FROM node:10-slim
WORKDIR /app
COPY dist/index.js .
CMD ["node", "index.js"]

2. Run everything in one command.

FROM node:10-slim
WORKDIR /app
COPY . .
RUN npm install --production && npm install -g @zeit/ncc && ncc build app.js -o dist && rm -rf node_modules
CMD ["node", "dist/index.js"]

Also will work, but it is necessary to rm -rf node_modules each time before build, and besides index.js file, we will have unused app files

3. Multi-stage Docker builds, which is the best one!

With multi-stage builds, you use multiple FROM statements in your Dockerfile. Each FROM instruction can use a different base, and each of them begins a new stage of the build. You can selectively copy artefacts from one stage to another, leaving behind everything you don’t want in the final image.

After using ncc with multi-stage builds, our largest build was 2.5 MB, before it was 70 MB.
We’ve finally got the smallest image.

FROM node:10-slim as builder
WORKDIR /app
COPY . .
RUN npm install --production
RUN npm install -g @zeit/ncc
RUN ncc build app.js -o dist

FROM node:10-slim
WORKDIR /app
COPY --from=builder /app/dist/index.js .
CMD ["node", "index.js"]

Small TIP:

We didn’t use any binary dependencies for our applications, so we could build our images on x86 and run them on armv7. If you use binary dependencies and your target platform processor architecture is different, build your images on a machine with the same architecture or use a virtual machine which emulates the architecture of the processor you need.

Conclusion

I hope you have learned at least some useful information from this post and at the end, I want to share with you our final results:

-Delta for our images before any optimisation:

• 600 MB base node image
• ~100 MB for each new image

-Delta, after all the steps:

• 100 MB node image
• ~2.5 MB for each new image

As I noticed in the beginning, our goal was to run as many containers as possible. For example, to run 7 containers we needed ~1.3 GB of SSD on start for images and overhead ~30 MB RAM for each container because of PM2, now it is only 117.5 MB of SSD and 210 MB less RAM usage.

Useful links

1. Dockerhub Node.js images could be found here
2. Docker multi-stage builds
3. Best practices for writing Dockerfiles
4. NCC